Débitmètre UFM CoolPoint CT6 moniteur de débit numérique 3/4" points de vente NPT 25 GPM 8 broches

Heres some Factory info that should be correct for it, Google the part number if you need to see the info yourself

Description User-Configurable Options This flowmeter is made for water, water/glycol coolant or low viscosity fluids. It has the following features: • Flow rate transmitter 4-20 mA • Solid state relay can be configured as alarm or pulse out • LED digital display • No moving parts to clog or wear • Certified CSA and CE • Rotatable enclosure optional for orientation of reading or electrical connection Electrical Specifications • Input Power: 10 - 30 VDC @ 80 mA • Output: 4-20mA for flow with 100 pulses per gallon from the solid state relay for all units except for the 2 inch CP16 which is 25 pulses per gallon • Electrical Connection Pin Connector (standard) Pigtails (optional) Junction Box with terminal strip (optional) Material Specifications Flow bodies of brass or 316 Stainless Steel with PVDF sensors and Viton® seals standard. PEEK sensors used for high temp for fluids above 150° F.

Features that are selectable on 4-20 mA units include: • Selectable alarm state (N.O. or N.C.) • Set point or pulse output • Engineering units (GPM, LPM) Instrument Specifications • Flow Visual readout: 3 digit LED, 0.3" digit height Deadband for Alarm: 5% of full scale (maximum f l ow) Accuracy: ±2% of full scale (maximum flow) Repeatability: ±.25% of indicated flow Turndown (ratio of max to minimum fl ow rates): 10:1 at all temperatures and 20:1 available optionally for standard temperatures. • Pressure 300 PSIG (20 Bar) operating pressure • Response time 450 ms. • General Fluid temperature limits: 35-150° F (2-66° C) standard, 150-210° F (66-99° C) optional. Enclosure rating: IP 65, Type 1, 3, 4, 12 and 13 • Pipe Connections: Female NPT, BSPP & BSPT • Back pressure of 10 PSIG required. (See manual for elevated temperature.)